![10 Common Electrical Mistakes To Avoid in Your Kent Home](https://electonservices.com/wp-content/uploads/2023/09/about-1.webp)
Electricity is a powerful force that can be both helpful and dangerous. It’s important to be aware of the potential risks associated with electricity and to take steps to avoid electrical hazards in your home.
Here are 10 common electrical mistakes you should avoid in your Kent, WA home:
1. Overloading outlets:
Plugging too many appliances into one outlet can overload the circuit and cause a fire. Be sure to check the amperage rating of your appliances and outlets to avoid overloading the circuit.
2. Using extension cords:
Extension cords are meant for temporary use only. Using them permanently can overload the circuit and cause a fire. If you need to use an extension cord, make sure it is the right size for the job and that it is in good condition.
3. Ignoring flickering lights:
Flickering lights can be a sign of a loose connection or a faulty wire. Don’t ignore flickering lights, as they can lead to a fire. Call a qualified electrician to inspect the issue.
4. Not using GFCI outlets:
GFCI (ground fault circuit interrupter) outlets are designed to protect you from electric shock. They should be installed in all outlets located near water, such as in bathrooms, kitchens, and laundry rooms.
5. Using outdated electrical systems:
Outdated electrical systems are not as safe as modern systems. They may not be able to handle the power demands of today’s appliances. If your home has an outdated electrical system, consider having it upgraded by a qualified electrician.
6. DIY electrical work:
Unless you are a qualified electrician, it is best to avoid doing any electrical work yourself. Electrical work can be dangerous if it is not done correctly. If you need electrical work done in your home, call a qualified electrician.
7. Ignoring electrical cords:
Frayed or damaged electrical cords can pose a fire hazard. Be sure to inspect your electrical cords regularly and replace any that are damaged.
8. Not using surge protectors:
Surge protectors can protect your electronic devices from damage caused by power surges. It is a good idea to use surge protectors for all of your valuable electronics.
9. Ignoring electrical panel issues:
If you notice any problems with your electrical panel, such as hot wires or buzzing sounds, call a qualified electrician immediately even if that means to pause your home remodeling project. Electrical panel problems can be a serious safety hazard.
10. Ignoring smoke detector issues:
Smoke detectors are an important part of your home’s safety system. Be sure to test your smoke detectors regularly and replace the batteries when needed.
Additional Tips:
- Have your electrical system inspected by a qualified electrician every few years.
- Teach your children about electrical safety.
- Create an emergency plan in case of an electrical fire.
By following these tips, you can help to prevent electrical hazards in your home and keep your family safe.
Conclusion
Electrical safety is important for everyone. By being aware of the common electrical mistakes and taking steps to avoid them, you can help to keep your home safe and prevent electrical hazards.